Built for industry. Trusted by engineers.

Heavy-charge pusher and pit furnaces built for the temperatures and uptime forging plants demand around the clock.

Applications we run

• Billet pre-heating for forging
• Post-forge normalising lines
• Stress-relief annealing on heavy sections
• Pusher-line hardening & quench

Pit and continuous lines sized for tonnage, with consistent microstructure across the full load.

Applications we run

• Bulk pit annealing (up to 10-tonne charge)
• Continuous normalising lines
• Tempering of long steel sections
• Stress-relief on heavy forgings

Applications we run

• Hardening & quenching
• Tempering
• Gas carburizing & carbonitriding
• Gas nitriding
• Annealing & stress relieving

Applications we run

• Aluminium melting & holding
• Copper / brass / bronze melting
• Billet & ingot pre-heating
• Non-ferrous degassing & fluxing
• Ferrous normalising & annealing

Applications we run

• Crucible & ladle pre-heating
• Die & mould pre-heating
• Sand-core & shell-mould baking
• Metal holding furnaces
• Sand reclamation heat

Traceable, tightly controlled cycles for flight- and defence-critical components, with uniformity surveys documented against your process spec.

Applications we run

• Solution treatment & ageing of aluminium alloys
• Vacuum-grade annealing of titanium & superalloys
• Stress relief on machined structural parts
• Hardening & tempering of ordnance components

Heavy-section furnaces for coach, wagon and permanent-way components, sized for the charge weights railway workshops handle.

Applications we run

• Normalising of axles & couplers
• Spring hardening & tempering
• Rail fastening heat treatment
• Stress relief on welded bogie fabrications

Continuous mesh-belt and pusher sintering lines with controlled atmosphere — de-wax, sinter and cool in a single pass.

Applications we run

• De-waxing & pre-sinter burn-off
• Mesh-belt sintering under endothermic atmosphere
• Sinter-hardening with controlled cooling
• Steam treatment of PM components

Continuous lines built for high throughput on small parts — patenting, hardening and tempering at production speed.

Applications we run

• Patenting of high-carbon wire
• Spheroidise annealing before cold forming
• Mesh-belt hardening & tempering of fasteners
• Stress relief of coiled springs

Chamber and pit furnaces for tool steels, with the slow, controlled ramps and pre-heat stages die work demands.

Applications we run

• Hardening of HSS & die steels
• Multi-stage pre-heat & austenitising
• Double / triple tempering cycles
• Sub-critical anneal & die stress relief

Bell and batch annealing under controlled atmosphere for the electrical-steel work that decides a core's magnetic properties.

Applications we run

• Lamination & transformer-core annealing
• Stress relief of motor laminations
• Copper & winding-wire annealing
• Component curing & drying ovens

Annealing lehrs and decorating ovens with the gentle, even ramps that keep glass free of residual stress.

Applications we run

• Annealing lehrs for container & tableware glass
• Decorating & enamel-firing ovens
• Bending & sagging of flat glass
• Laboratory glassware stress relief

Tilting furnaces for ceramic melt, plus bisque and high-temperature kiln work — refractories tuned to ceramic chemistry.

Applications we run

• Ceramic melt in tilting furnaces
• Glaze bisque firing
• High-temperature ceramic firing
• Refractory test cycles

High-temperature kiln and dryer work for refractory production, plus laboratory furnaces for plant quality control.

Applications we run

• Refractory brick & shape firing
• Castable curing & dry-out ovens
• Kiln-furniture firing cycles
• Loss-on-ignition & lab test furnaces

Small-charge melting, casting and burnout equipment for gold, silver and platinum work, with close temperature control.

Applications we run

• Gold & silver melting in crucible furnaces
• Investment-casting wax burnout
• Annealing of sheet, wire & chain
• Refining & cupellation furnaces

Industrial hot-air ovens with even air circulation — batch and conveyorised, sized to the parts coming off your finishing line.

Applications we run

• Powder-coating cure ovens
• Paint & primer baking
• Pre-heat & moisture-removal drying
• Conveyorised continuous curing lines

Calcining, drying and controlled-atmosphere work for process industries, built for the temperatures and residence times the reaction needs.

Applications we run

• Calcination of powders & catalysts
• Drying & solvent burn-off ovens
• Controlled-atmosphere process furnaces
• Rotary furnaces for bulk material

Sealed muffle chambers and hot-air ovens for laboratory and quality-control work where contamination is unacceptable.

Applications we run

• Hot-air sterilisation
• High-temperature muffle work
• Ash content & loss-on-ignition
• Material testing cycles

Bench and floor-standing muffle furnaces and ovens for metallurgy labs, engineering colleges and in-house R&D benches.

Applications we run

• Muffle furnaces for material testing
• Ash content & loss-on-ignition
• Small-batch heat-treatment trials
• Hot-air ovens for sample preparation